
PET Bottle-to-Filament Machine — STL Set
PET Bottle to Filament Machine — 3D Printable Bottle Strip Recycler STL Set (Turn Bottles into 1.75mm Filament)
$12.99
Delivered as a ZIP right after checkout, and always available in your library.
Sold separately — this one is not part of the Maker File Club.
About this design
Turn PET bottles into 1.75mm 3D-printer filament with a machine you print yourself. A cut bottle strip is pulled through a heated printer nozzle block, cooled by a fan, and wound onto a geared, motor-driven spool. WHAT YOU GET: all 14 print-ready STL files (15 printed pieces — the bearing stand prints x2): base enclosure, controller faceplate, top deck plate, fan grill, geared + plain spool flanges, spool drum core, pinion gear, bearing stand, motor bracket, hotend slide plate, hotend bracket, guide arm and guide roller — plus the full build guide (BOM, per-part print settings, assembly order, wiring overview, tuning notes). Print the controller faceplate FIRST and test-fit your controller before printing the rest. FILES ONLY — no printed parts, electronics, or hardware are included. You source: an H56UTR-style panel temperature controller, MK8/CR-10 heater block with M6 nozzle, 24V 40W heater cartridge + 100K thermistor, 4010 fan (24V), 24V DC gear motor (~10–30 RPM) with PWM speed controller, 24V 5A+ power supply, 3x 608-2RS bearings, M8 shaft/rod, and M3/M4 fasteners. Print hot-zone parts (hotend bracket + slide plate) in ASA or PC only — PLA/PETG will creep near the 240–260°C block; structural parts in PETG minimum, ASA preferred. Honest expectations: bottle filament varies with bottle wall thickness and strip quality — this makes usable, printable filament, not factory-tolerance filament, and a bottle strip cutter is not included. Several dimensions are marked ASSUMED in the guide with a measure-and-adjust table. Personal use only (see LICENSE.txt in the download). Sold separately — this machine set is NOT part of the Maker File Club. Instant download.
